Fully Automatic Water Level Indicator/Controller with Overflow Alarm and Motor Control (2 LCD Level Indication) Float sensor based.
This water level indicator/controller indicates the water level in water tank, inbuilt alarm rings when tank is full as well as when tank water is below 20%. This Device will Automatically Switch On your Water Pump/Motor when the water level is below 20% to fill your tank and automatically switch off the water motor when water is 100% to save WATER and ELECTRICITY.
- 2 LCD Level Indication of 20% and 100%.
- Buzzer based alarm for tank overflow and when water is below 20%.
- Motor Start modes : Manual/Auto. In Auto mode, pump/motor automatically starts when water is below 20% whereas in Manual mode motor doesn’t starts automatically even when water is below 20%, this is usefull for places where supply water is not available 24 hours.
- Manual Switch to Start or Stop pump/motor anytime.
- Switch for manual/Auto Mode .
- Power Indication LED.
- LCD Based Display.
- Motor Status on LCD Display.
- Manual/Auto mode Status on LCD Display.
- Float sensors based systems, no corrosion, no rusting, no oxidization, no current flow in water tank at all.
- No maintanence required at all, works for years and years.
- Modular Finish.
- Wall Mount to mount the Device in Wall.
- Screw terminal to connect wires.
- Easy To Install.
- Advanced hyperthreading Technology.
- Saves Water and Electricity.
Operating voltage: Input AC 110-250V 50Hz-60Hz (Regular power supply)
Motor Load supported: Can Switch Pump/Motor ON/OFF Maximum 15A (Ampere) Load @ 240V (Volt) upto 2 HP motor.
- 2 Float sensors.
- Mounting Screws.
- Installation Manual.
- 6 Months Repair Warranty.